Ultra Start 1175 Series - Manual (Page 7)

PAGE 7
OWNER’S GUIDE
Remote Transmitter Learn
STEP 1 - Within 3 seconds turn the ignition key to the “ON”
position three times leaving “ON” the third time.
NOTE:
STEP 3 (Default) - While holding the Program Button, press and
release the START button on each of the remote
transmitters to be programmed.
If the parking lights do not turn “ON”, release the Program Button and
turn the ignition to the “OFF” position, wait 5sec and repeat steps 1 & 2.
STEP 2 - Press and hold the Program Button. The park lights will
turn “ON” and the horn (optional) will honk once.
Continue to hold the Program Button,
the park lights will turn “OFF” and the
horn (optional) will chirp 5 times quickly.
IMPORTANT! All remote transmitters not programmed at this time
will be erased from memory for security.
Battery Replacement
The transmitter battery should be changed at least once every year to maintain
proper operating range. Replace with a quality 23A 12volt Alkaline battery.