Avocent LongView Wireless Installer - Manual (Page 23)

Chapter 3: Operations 17
Advanced menu options
The LongView Wireless OSD Advanced menu allows you to fine-tune the
video settings that were established with the Auto Setup function. You may
tune the horizontal and vertical position of the video monitor window, as
well as adjust the brightness and contrast of the video image. You may also
adjust the video clock phase in the LongView Wireless transmitter relative
to the video clock at your source computer to assure the cleanest, sharpest
video image.
Image Adjustment Using the LongView Wireless OSD
When configuring the OSD, you may use the Auto Setup function to
automatically optimize the video of your LongView Wireless Extender, or
you may choose to optimize it manually.
To optimize video automatically:
1. Activate the OSD Main menu on the receiver unit by pressing and
holding the left Shift key followed by the right Shift key and then
releasing both.
2. Optimize the video setup of your Wireless Extender by selecting Auto Setup
- Run. This will automatically optimize your video setup parameters.
3. From the OSD Main menu, select Finish at the bottom to save your OSD,
keyboard and Auto Setup parameters.
-or-
Select Cancel to exit without saving changes.
To optimize video manually:
If your monitor image requires further adjustment after running the Auto
Setup, you may use the Advanced Setup options from the LongView Wireless
OSD menu.
1. Activate the OSD Main menu on the receiver unit by pressing and
holding the left Shift key followed by the right Shift key and then
releasing both.
2. Select the Advanced tab from the OSD Main menu.