Brother PE-770 - Manual (Page 4)

2
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
■ Tajima (.dst) Embroidery Data
• When a .dst file is imported, the only way that you can view the design is by selecting the pattern (file
name).
Then press
to display the design on the screen.
Transferring embroidery patterns from the computer to machine
Note
z Only a USB flash drive (USB flash memory)
can be connected to the USB port on this
machine.
z An embroidery pattern can be transferred to
the machine from USB media containing
data for no more than 200 embroidery
patterns.
z Embroidery patterns cannot be transferred to
the machine if the USB media contains data
for more than 200 embroidery patterns. In
this case, reduce the number of designs
saved on the USB media.
z In addition, if the embroidery designs contain
too many colors (this number may vary
within the designs themselves), it may not be
possible to transfer an embroidery pattern to
the machine, even if there are less than 200
embroidery patterns that have been saved on
the USB media. In this case also, reduce the
number of designs saved on the USB media.
z Save the patterns in the root directory of the
USB media. If embroidery data is saved in a
folder on USB media, that embroidery data
cannot be retrieved by the machine.
a
Insert the USB media into the USB port on the
computer.
a USB port on the computer
b USB media
b
The “Removable Disk” icon appears in
“Computer (My computer)” on the computer.
c
Copy the pattern data to “Removable Disk”.