Esg-b firmware installation for versions <b.03.20, Introduction, Required equipment – Agilent Technologies E4400-60597 User Manual
Page 14: Safety considerations, Esg-b
Agilent Technologies Firmware Upgrade Kits E4400-60230 and E4400-60597 for PSG/ESG Signal Generators
Firmware Upgrade Kits E4400-60230 and E4400-60597 for PSG/ESG Signal Generators
14
ESG-B Firmware Installation For Versions <B.03.20
Introduction
The following procedure describes how to install firmware revisions into ESG-B RF Signal Generators with existing
firmware revisions <B.03.20. These instructions assume you are using Microsoft Windows and that you are familiar with
basic file management within Windows.
Required Equipment
•
PC
•
9-pin null modem cable, with female connectors on both ends.
The 9-pin null modem cable can be made from a standard female-female 9-pin serial cable and a correctly-gendered null
modem adapter, or it can be assembled from the following parts:
Safety Considerations
CAUTION
Electrostatic discharge (ESD) can damage or destroy electronic components. All work on
electronic assemblies should be performed at a static-safe workstation.
Item
Quantity
Description
Part Number
1
1
9-pin Serial RS-232 cable (male-female)
8120-6188
2
1
9-pin Null Modem Adapter (male-male)
5181-6639
3
1
9-pin gender changer (female-female)
1252-7825