Agilent Technologies E4400-60597 - Manual (Page 11)

Agilent Technologies Firmware Upgrade Kits E4400-60230 and E4400-60597 for PSG/ESG Signal Generators
Check Signal Generator Functionality
11
Install PSG/ESG Upgrade Assistant 5.12 and Firmware Files
PSG/ESG Upgrade Assistant 5.12 is used along with firmware files to upgrade the firmware on PSG/ESG signal generators.
They are both available for download from the Agilent Technologies website or from a CD-ROM.
To install the PSG/ESG Upgrade Assistant 5.12
and firmware files from the Agilent Technologies website
1. Access the Agilent Technologies website by typing: http://www.agilent.com/find/upgradeassistant
or type “upgradeassistant” in the Quick Search box from the Agilent Technologies website.
2. Download and install the PSG/ESG Upgrade Assistant 5.12 installation program onto your computer.
The installation program places the PSG/ESG Upgrade Assistant 5.12 in a default installation folder
(C:\Program Files\Agilent\PSG-ESG Upgrade Assistant). The default installation folder can be changed using the
Browse button.
3. Download and install a version of PSG or ESG firmware files onto your computer.
The installation program places the selected firmware files in a default installation folder
(C:\Program Files\Agilent\PSG-ESG Upgrade Assistant). The default installation folder can be changed using the
Browse button.
4. After installing both the PSG/ESG Upgrade Assistant 5.12 program and the selected firmware files, proceed to “Using
the PSG/ESG Upgrade Assistant 5.12 with Firmware Files” on page 11.
To install PSG/ESG Upgrade Assistant 5.12
and firmware files from CD-ROM
1. Insert the firmware upgrade CD-ROM into the computer’s CD-ROM drive.
An autostart file should run automatically.
2. Once the PSG/ESG Upgrade Assistant 5.12 starts, proceed to “Using the PSG/ESG Upgrade Assistant 5.12 with
Firmware Files” on page 11.