Brother HL-4200CN - Manual (Page 15)

14
Setting Up Your Printer
1
Pull the paper tray out until it stops.
Lift up the front of the paper tray slightly and
then remove it completely from the printer.
2
Remove the protective packing.
3
Slide the side paper guides out.
Lift the end paper guide and insert it into the
slot of the paper size you want to load.
4
Load paper in the paper tray.
Make sure that all the paper is under the
tabs.
5
Align the side paper guides with the paper.
6
Put the paper tray back in the printer.
3 Load Paper in the Paper Tray
Paper Tray
Protective Packing
End Paper Guide
Paper Guide
MAX
Up to here
Step 1