Brother DCP 9040CN - Manual (Page 27)

Printing
19
1
Media Type
1
You can use the following types of media in your machine. For the best print quality, select the type of media
that you wish to use.
Note
• When using ordinary plain paper choose Plain Paper. When using heavier weight paper, envelopes or
rough paper choose Thick Paper or Thicker Paper. For bond paper, choose Bond Paper.
• When you use envelopes, choose Envelopes. If the toner is not fixed to the envelope correctly when
Envelopes has been selected, choose Env. Thick. If the envelope is crumpled when Envelopes has
been selected, choose Env.Thin.
Duplex / Booklet (Not available for MFC-9440CN and DCP-9040CN)
1
When you want to print a booklet or do duplex printing, use this function, and then from the Advanced tab,
choose a Duplex Type (See Duplex printing on page 4).
Color/Mono
1
You can change the Color/Mono settings as follows:
„ Color
If you want the printer to use Color mode even when printing monochrome document, select this mode.
„ Mono
Select this mode if your document has only black and grayscale text and/or objects. Mono mode makes
the print processing speed faster than color mode. If your document contains color, selecting Mono mode
prints your document in 256 levels of gray.
„ Auto
The printer checks the content of your documents for color. If color is detected, it prints in color. If no color
content is detected, it prints in monochrome. This operation may reduce the total printing speed.
Note
If the Cyan, Magenta or Yellow toner runs out, choosing Mono will allow you to keep printing as long as
the Black toner does not run out.
Paper Source
1
You can choose Auto Select, Tray1, MP Tray or Manual and specify separate trays for printing the first page
and for printing from the second page onwards.
Plain Paper Thin Paper Thick Paper Thicker Paper Bond Paper Label
Post card Envelopes Env. Thick Env. Thin Recycled Paper