Brother DCP 9040CN - Manual (Page 104)

Network Scanning
96
4
Using the Scan key
4
Note
• If you want to scan a document using the duplex scanning feature, you need to put the document in the
ADF and then choose 2sided (L)edge or 2sided (S)edge depending on your document layout.
• Choose your document layout from following table:
Document Layout Table
• Duplex scan is supported by the MFC-9840CDW and DCP-9045CDN only.
• Duplex scan is available from the ADF only.
• Duplex scan is not available for legal size paper.
Scan to E-mail (PC)
4
When you choose Scan to E-mail (PC) your document will be scanned and sent directly to the PC you
designated on your network. ControlCenter3 will activate the default E-mail application on the designated PC.
You can scan and send a black and white or color document from the PC as an attachment.
You can change the scan configuration. (See E-mail on page 78.)
a
Put the document face up in the ADF, or face down on the scanner glass.
b
Press (Scan).
c
Press a or b to choose Scan to E-mail.
Press OK.
If your machine is an MFC-9440CN, MFC-9450CDN, DCP-9040CN or DCP-9042CDN, go to Step f.
If your machine is an MFC-9840CDW or DCP-9045CDN, go to Step d.
Portrait Landscape LCD Message
Front Back Front Back
(L)edge
(Long edge)
Front Back Front Back
(S)edge
(Short edge)