Brother DCP 9040CN - Manual (Page 154)

Printing and Faxing
146
8
Print Settings
8
Basic tab
„ Media Type
You can choose from the following media types:
• Plain Paper
• Thin Paper
• Thick Paper
• Thicker Paper
• Bond Paper
• Recycled Paper
• Envelopes
• Envelope Thin
• Envelope Thick
• Postcard
• Label
„ Color/Mono
You can change the Color/Mono settings as follows:
• Auto
The printer checks the content of your documents for color. If color is detected, it prints in color. If no
color content is detected, it prints in monochrome. The total printing speed may become slower.
• Color
If you want the printer to use Color mode even when printing monochrome document, select this mode.
• Mono
Select this mode if your document has only black or grayscale text and/or objects. Mono mode makes
the print processing speed faster than color mode. If your document contains color, selecting Mono
mode prints your document in 256 levels of gray.
Note
If the Cyan, Magenta or Yellow toner runs out, choosing Mono will allow you to keep printing as long as
the Black toner does not run out.