Brother MFC-495CW - Manual (Page 180)

USB cable scanning
173
12
For Touchscreen models
12
a Put a memory card or USB Flash memory drive into your machine.
CAUTION
DO NOT take out the memory card or USB Flash memory drive while Photo Capture is blinking to avoid
damaging the card, USB Flash memory drive or the data stored on them.
If you take out the memory card or USB Flash memory drive while the Photo Capture key is flashing, you
must restart your computer at once before putting the same memory card or USB Flash memory drive into
the machine. If you do not restart your computer, the data on your media may be destroyed.
b Load your document.
c Press (Scan).
d Press Scan to Media.
Do one of the following:
„ If you want to change the quality, go to step e.
„ Press Black Start or Color Start to start scanning without changing additional settings. Go to step h.
e Press Quality and then press the quality you want.
Do one of the following:
„ If you want to change the file type, go to step f.
„ Press Black Start or Color Start to start scanning without changing additional settings. Go to step h.
f
Press File Type and then press the file type you want.
Do one of the following:
„ If you want to change the file name, go to step g.
„ Press Black Start or Color Start to start scanning without changing additional settings. Go to step h.
Note
• If you choose color in the quality setting, you cannot choose TIFF.
• If you choose black and white in the quality setting, you cannot choose JPEG.