Brother MFC-495CW - Manual (Page 184)

USB cable scanning
177
12
For Touchscreen models
12
Setting the new default
12
a Press (Scan).
b Press Scan to Media.
c Press and choose your new setting. Repeat this step for each setting you want to change.
d
After changing the last setting, press a or b to display Set New Default. Press Set New Default.
e
Press Yes to confirm.
f
Press Stop/Exit.
Factory reset
12
a
Press (Scan).
b
Press Scan to Media.
c
Press a or b to display Factory Reset. Press Factory Reset.
d
Press Yes to confirm.
e
Press Stop/Exit.