Brother MFC-495CW - Manual (Page 43)

Scanning
36
2
Pre-Scanning to crop a portion you want to scan
2
You can preview your image and crop unwanted portions before scanning by using the PreScan button. When
you are satisfied with the preview, click the Start button in the Scanner Setup dialog box to scan the image.
a
Follow the steps from a to g of Scanning a document into the PC on page 34.
b Choose the settings for Scan (Image Type), Resolution, Scan Type, Brightness, Contrast and
Document Size as needed.
c
Click PreScan.
The whole image is scanned into the PC and appears in the Scanning Area (1) of the Scanner Setup
dialog box.
d Press and hold down the left mouse button and drag it over the portion you want to scan.
1 Scanning area
Note
You can enlarge the image using the icon, and then use the icon to restore the image to its
original size.
1
1