Brother MFC-J435W - Manual (Page 8)

Chapter 1
4
LCD screen
1
LCD Contrast
1
You can adjust the LCD contrast. If you are
having difficulty reading the LCD, try
changing the contrast setting.
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose LCD Settings.
Press OK.
d
Press a or b to choose LCD Contrast.
Press OK.
e
Press d to increase the contrast or press
c
to decrease the contrast.
Press OK.
f
Press Stop/Exit.
Setting the backlight
brightness
1
You can adjust the brightness of the LCD
backlight. If you are having difficulty reading
the LCD, try changing the brightness setting.
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose LCD Settings.
Press OK.
d
Press a or b to choose Backlight.
Press OK.
e
Press a or b to choose Light, Med or
Dark.
Press OK.
f
Press Stop/Exit.
Setting the Dim Timer for the
backlight
1
You can set how long the LCD backlight stays
on after you go back to the Ready screen.
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose LCD Settings.
Press OK.
d
Press a or b to choose Dim Timer.
Press OK.
e
Press a or b to choose 10Secs,
20Secs, 30Secs or Off.
Press OK.
f
Press Stop/Exit.