Brother MFC-J435W - Manual (Page 38)

34
Packing and shipping
the machine
A
When you transport the machine, use the
packing materials that came with your
machine. If you do not pack the machine
properly, any damage that may occur in
transit may not be covered by your warranty.
IMPORTANT
It is important to allow the machine to
“park” the print head after a print job.
Listen carefully to the machine before
unplugging it to make sure that all
mechanical noise has stopped. Not
allowing the machine to finish this parking
process may lead to print problems and
possible damage to the print head.
a
Open the ink cartridge cover.
b
Press the ink release levers to release
the ink cartridges and then take out the
ink cartridges. (uuBasic User’s Guide:
Replacing the ink cartridges)
c
Install the orange protective part and
then close the ink cartridge cover.
IMPORTANT
• Make sure the plastic tab on the right side
of the orange protective part (1) clicks
securely into place (2).
• If you are not able to find the orange
protective part, ship the machine without
it. DO NOT install the ink cartridges as an
alternative before shipping.
d
Lift the machine from the front and hook
the tab of the orange protective part into
the keyed opening (1) on the bottom of
the paper tray. Then latch the protective
part over the raised portion of the paper
tray (2).
1 2
1
2