Brother MFC-J4410DW - Manual (Page 26)

Chapter 4
20
f
Press s or t to display
Memory Receive.
g
Press Memory Receive.
h
Press s or t to display Paging.
i
Press Paging.
j
Enter your cell phone or pager number
followed by # # (up to 20 digits).
Press OK.
Do not include the area code if it is the
same as that of your machine.
For example, press:
1 8 0 0 5 5 5 1 2 3 4 # #
k
Do one of the following:
 If you are programming your cell
phone number and do not need to
enter a PIN, press OK.
 If your pager needs a PIN, enter the
PIN, press #, press PAUSE, and then
enter your fax number followed by
# #.
Press OK.
For example, press:
1 2 3 4 5 # PAUSE 1 8 0 0 5 5 5 6 7 8
9 # #
 If your pager does not need a PIN,
press:
PAUSE, and then enter your fax
number followed by # #. Press OK.
For example, press:
PAUSE 1 8 0 0 5 5 5 6 7 8 9 # #
l
Press .
NOTE
You cannot change a cell phone number,
pager number or PIN remotely.
Fax Storage
4
If you choose Fax Storage, your machine
stores received faxes in the memory. You will
be able to retrieve fax messages from
another location using the remote retrieval
commands.
If you have turned on Fax Storage, a backup
copy will be printed at the machine.
a
Press (Settings).
b
Press s or t on the Touchpanel to
display Fax.
c
Press Fax.
d
Press s or t to display
Setup Receive.
e
Press Setup Receive.
f
Press s or t to display
Memory Receive.
g
Press Memory Receive.
h
Press s or t to display Fax Storage.
i
Press Fax Storage.
j
Press .
NOTE
Color faxes cannot be stored in the
memory. When you receive a color fax,
your machine prints it.