Brother MFC-J4410DW - Manual (Page 35)

Receiving a fax
29
4
Polling overview
4
Polling lets you set up your machine so other
people can receive faxes from you, but they
pay for the call. It also lets you call somebody
else’s fax machine and receive a fax from it,
so you pay for the call. The polling feature
needs to be set up on both machines for this
to work. Not all fax machines support polling.
Polling receive
4
Polling receive lets you call another fax
machine to receive a fax.
Setup to receive polling
4
a
Press (Fax).
b
Press Options.
c
Press s or t on the Touchpanel to
display Polling RX.
d
Press Polling RX.
e
Press On (or Off).
f
Enter the fax number you are polling
using Speed Dial or the dial pad on the
Touchpanel.
g
Press Fax Start.
The Touchscreen shows Dialing.
Sequential polling
(Black & White only)
4
Sequential polling lets you request
documents from several fax machines in one
operation. Afterwards, a Sequential Polling
Report will be printed.
a
Press (Fax).
b
Press Options.
c
Press s or t on the Touchpanel to
display Polling RX.
d
Press Polling RX.
e
Press On (or Off).
f
Press Options. Press s or t to
display Broadcasting.
g
Press Broadcasting.
h
Press Add from Address Book.
Press
to choose alphabetical
order or numerical order. Press the
check boxes of the numbers you want to
add to the broadcast.
After you have checked all the numbers
you want to add, press OK.
i
Press s or t to review and confirm the
displayed list of numbers to be polled,
and then press OK to accept it.
j
If you are finished changing settings,
press OK.
k
Press Fax Start.
The machine polls each number or
Group number in turn for a document.
Press while the machine is dialing to
cancel the polling process.
To cancel all sequential polling receive jobs,
see Canceling a Sequential Polling Job
on page 30.