Brother MFC-8820DN - Manual (Page 355)

TROUBLESHOOTING AND ROUTINE MAINTENANCE 22 - 3
Out Of Memory You can’t store data in the memory. (Fax sending in process)
Press Stop and wait until the other
operations in progress finish and
then try again.
—OR—
Clear the data in the memory. (See
Out of Memory message on page
10-5.)
(Copy operation in process)
Press Stop and wait until the other
operations in process finish and
then try again.
—OR—
Clear the data in the memory. (See
Out of Memory message on page
10-5.)
—OR—
Add an optional memory. (See
Memory board on page 23-1.)
(Printing operation in process)
Reduce print resolution. (See Print
Quality on page 12-5.)
—OR—
Clear the data in the memory. (See
Out of Memory message on page
10-5.)
—OR—
Add an optional memory. (See
Memory board on page 23-1.)
No
Response/Busy The number you dialed does not answer or is
busy. Verify the number and try again.
Not
Registered You tried to access a One-Touch or
Speed-Dial number that is not programmed. Set up the One-Touch or Speed-Dial
number. (See Storing One-Touch
Dial numbers on page 7-1 and
Storing Speed-Dial numbers on
page 7-2.)
Pls Open
Cover A page, piece of paper or paper clip, etc. may
be jammed inside the MFC. Open the front cover. If you see any
jammed paper or other item, gently
pull it out, then close the front cover.
If the error message remains, open
and close the front cover again.
If the MFC cannot reset itself and
return to the date and time prompt, it
will display Machine Error XX.
Please call Brother Customer
Service and tell them the Machine
Error number:
In USA:
1-800-284-4329
In Canada: 1-877-BROTHER
No DX Tray You tried to make duplex printing with duplex
cover open. Install the duplex tray correctly. (See
Paper is jammed in the duplex tray
(For MFC-8820D and
MFC-8820DN) on page 22-11.)
ERROR MESSAGES
ERROR
MESSAGE CAUSE ACTION