Brother MFC-8820DN - Manual (Page 331)

NETWORK SCANNING (WINDOWS ® 98/98SE/ME/2000 PROFESSIONAL AND XP ONLY) 19 - 1
19
To use the MFC as a Network Scanner, the NC-9100h Network
board should be installed into the MFC (MFC-8820DN standard) and
configured with TCP/IP and mail server settings if you use Scan to
E-mail (E-mail server). You can set or change NC-9100h settings
from the control panel or with the BRAdmin Professional utility or
Web Management. (Please see the NC-9100h User's Guide on the
CD-ROM.)
Registering your PC with the MFC
If you need to change the MFC that was registered to your PC during
the installation of MFL-Pro (see Quick Setup Guide on page 38),
follow the steps below.
1
For Windows ® 98/Me/2000
From the Start menu, select Control panel, Scanners and
Cameras, and then right-click Scanner Device icon and select
Properties to view the Network Scanner Properties dialog box.
For Windows ® XP
From the Start menu, select Control panel, Printers and
Other Hardware, Scanner and Cameras (or Control panel,
Scanners and Cameras).
Network Scanning
(Windows
®
98/98SE/Me/2000
Professional and XP only)