Brother MFC-8820DN - Manual (Page 338)

19 - 8 NETWORK SCANNING (WINDOWS ® 98/98SE/ME/2000 PROFESSIONAL AND XP ONLY)
Scan to File
When you select Scan to File you can scan a black and white or color
original and send it directly to a PC you designate on your network. The
file will be saved in the folder and file format that you have configured in
the Brother SmartUI on the designated PC. You can change the Scan
configuration.
(For Windows ® 98/Me/2000: See Scan to File on page 14-8 to 14-9.)
(For Windows ® XP: See Hardware Section: Changing the Scan to
button configuration on page 15-5 to 15-11.)
1
Place the original face up in the ADF, or face down on the
scanner glass.
2
Press ( Scan ).
3
Press or to select Scan
to File .
Press Set .
4
Press or to select a
destination you want to send.
Press Set .
If the LCD prompts you to enter a PIN Number, enter the 4-digit
PIN Number for the destination PC on the control panel.
Press Set .
The MFC will start the scanning process.
For Network Scanning the Brother Control Center (SmartUI)
selections are used only for configuring the
Scan button. You
will not be able to initiate a network scan from the Brother
Control Center (SmartUI).
Max. 25 clients can be connected to one MFC on a Network. For
example, if 30 clients try to connect at a time, 5 clients will not
be shown on the LCD.
▲ Scan to E-mail
Scan to Image
Scan to OCR
▼ Scan to File
Select ▲▼ & Set