Brother MFC-8820DN - Manual (Page 339)

BROTHER NETWORK PC-FAX SOFTWARE 20 - 1
20
To use the MFC as a Network PC-FAX, the NC-9100h Network
board should be installed into the MFC (MFC-8820DN standard) and
configured with TCP/IP and mail server settings if you use Scan to
E-mail (E-mail server). (See Using Brother PC-FAX software on
page 17-1.)
Enable Network PC-FAX
To use the MFC for Network PC-FAX, see Using Brother PC-FAX
software on page 17-1.
Brother Network PC-FAX can be configured through PC-FAX Setup,
Sending tab.
Sending setup
In order to use the full functionality of Network PC-FAX it is strongly
recommended that you enable the Network PC-FAX Setup option on
the Sending tab Brother PC-FAX Setup.
1
Access the Sending Tab from the PC-FAX dialog box by
clicking
.
—OR—
From the Start menu, select All programs, Brother, Brother
MFL-Pro Suite, and then select PC-FAX Setup.
Brother Network PC-FAX
software
The items described below are specific items relating to the
Network version of PC-FAX software that is installed from the
"Optional network applications" on the CD-ROM supplied with
your MFC.