Brother DCP-J152W - Manual (Page 44)

Outline, Scan, and Copy or Cut
40
4
o
The machine starts printing. When it is finished, press OK
p Press .
For MFC-J285DW
4
a
Using a red pen, outline the areas of the document that you want to scan.
b
Load your document.
c
Press s or t to display Web.
Press Web.
d
If information regarding the Internet connection is displayed on the machine’s LCD, read the information
and press OK.
e
You will be asked if you want to display this information again in the future.
Press Yes or No.
NOTE
Occasionally, updates or announcements about your machine's feature will be displayed on the LCD.
Read the information, and then press OK.
f
Press s or t to display Apps.
Press Apps.
g Press Outline&Copy.
h Press Copy outlined area or Cut outlined area.
i If information regarding Copy outlined area or Cut outlined area is displayed, read the
information and press OK.
j You will be asked if you want to display this information again in the future.
Press Yes or No.
k
The Copy Settings screen will be displayed. Change your Print Quality or your Paper Size, if
necessary.
Press OK.
l
Press OK.
m
When Next page? is displayed, do one of the following:
 If there are no more pages to scan, press No. Go to step o.
 To scan more pages, press Yes and go to step n.
n Place the next page on the scanner glass.
Press OK.
The machine starts scanning the page. Repeat steps m and n for each additional page.
o
The machine starts printing. When it is finished, press OK.
p
Press .