Brother MFC-8950DWT User Manual
Page 32
25
Configuring your machine for a wireless network (For MFC-8710DW, MFC-8810DW, MFC-8910DW and MFC-8950DW(T))
3
For Touchscreen models
3
a
Before configuring your machine we recommend you write down your wireless network settings. You will
need this information before you continue with the configuration.
Check and record the current wireless network settings.
1
TKIP is supported for WPA-PSK only.
For example:
3
Note
If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine
supports the use of the first WEP key only.
b
Press Menu.
c
Press Network.
d
Press WLAN.
e
Press Setup Wizard.
f
When WLAN Enable? is displayed, press On to accept.
This will start the wireless setup wizard.
To cancel, press Stop/Exit.
g
The machine will search for your network and display a list of available SSIDs. Choose <New SSID>
using a or b.
Network name: (SSID)
Communication Mode
Authentication method
Encryption mode
Network key
Infrastructure
Open system
NONE
—
WEP
Shared key
WEP
WPA/WPA2-PSK
AES
TKIP
Network name: (SSID)
HELLO
Communication Mode
Authentication method
Encryption mode
Network key
Infrastructure
WPA2-PSK
AES
12345678