Brother MFC-9330CDW - Manual (Page 67)

Making copies
59
7
Adjusting the Color
Saturation
7
You can change the default setting for color
saturation.
a
Load your document.
b
Press ( Copy ).
c
Enter the number of copies.
d
Press Options .
e
Swipe up or down, or press a or b to
display
Color Adjust .
f
Press Color Adjust .
g
Press Red , Green or Blue .
h
Press a level of color saturation.
i
Repeat steps g and h if you want to
adjust the next color.
After adjusting the color settings,
press .
j
If you do not want to change additional
settings, press
OK .
k
Press Color Start .
Making 2-sided N in 1 copies
(MFC-9340CDW)
7
When you make 2-sided N in 1 copies from a
2-sided document, you must choose a layout
option in
2-sided Copy Page Layout .
You will be able to access 2-sided Copy
Page Layout after selecting
2-sided

2-sided for 2-sided Copy
and any N in 1 layout for Page Layout .
You must select an appropriate option in the
table.
IMPORTANT
• Load your document in the ADF to use the
2-sided Copy Page Layout feature.
• The 2-sided Copy Page Layout
feature does not work when you choose
2in1(ID) for Page Layout .
a
Load your document in the ADF.
b
Press ( Copy ).
c
Enter the number of copies.
d
Press Options .
e
Select 2-sided

2-sided in
2-sided Copy (see 2-sided Copying
(MFC-9330CDW and MFC-9340CDW)
on page 53).
Bound
Edge of the
Document Edge of the
copies to
be bound Option you
must choose
Long Edge Long Edge LongEdge

LongEdge
Short Edge LongEdge

ShortEdge
Short Edge Long Edge ShortEdge

LongEdge
Short Edge ShortEdge

ShortEdge