Brother MFC-440CN - Manual (Page 38)

Network printing from Windows ® basic TCP/IP Peer-to-Peer printing
32
5
Printer driver already installed
5
If you have already installed the printer driver and wish to configure it for network printing, follow these steps:
(For Windows ® 2000/XP usres)
5
a From the Printers and Faxes windows, select the printer driver you wish to configure.
b Select File and then Properties.
c Click the Ports tab and click Add Port.
d Select the port that you wish to use. Typically this would be Standard TCP/IP Port. Then click the
New Port... button.
e The Standard TCP/IP Port Wizard will start.
f Close Add Port and Properties dialog box.
(For Windows ® 98/Me usres)
5
a
From the Printers windows, select the printer driver you wish to configure.
b Select File and then Properties.
c Click the Details tab and click Add Port.
d In the Add Port dialog, select Other and then Brother LPR Port.
e Click OK and enter the port name.
Note
The default port name is BLP1. If you have already used this name, you will see an error message.
f
Port Properties dialog appears.
g
Enter the IP address of the machine that you wish to print to and click OK.
Other sources of information
5
See Configuring your network printer on page 7 to learn how to configure the IP address of the printer.