Brother MFC 8480DN - Manual (Page 60)

Wireless configuration for Windows ® using the Brother installer application (For MFC-8690DW and MFC-8890DW)
49
4
n
Check the printed Network Configuration page. Choose the status as it is shown for the
Wireless Link Status on the Network Configuration page. Click Next.
If your status is "Link OK.", go to step p.
If your status is "Failed To Associate", go to step o.
o
Click Finish. Wireless setup failed as it was unable to associate with a wireless network. This is probably
due to incorrect security settings. Reset the print server back to its factory default settings. (See
Restoring the network settings to factory default on pages 123) Confirm the security settings of your
wireless network and try starting from step e again.