Brother MFC 8480DN - Manual (Page 25)

Configuring your machine for a network
14
2
Gateway (and router)
2
A gateway is a network point that acts as an entrance to another network and sends data transmitted via the
network to an exact destination. The router knows where to direct data that arrives at the gateway. If a
destination is located on an external network, the router transmits data to the external network. If your network
communicates with other networks, you may need to configure the Gateway IP address. If you do not know
the Gateway IP address then contact your Network Administrator.
Step by step chart
2
a
Configure the TCP/IP settings.
b Change the print server settings.
„ Configure the IP address
i
See page 15
„ Configure the subnet mask
i
See page 15
„ Configure the gateway
i
See page 15
„ Using the BRAdmin Light utility i See page 18
„ Using the BRAdmin Professional 3 utility
i
See page 18
„ Using the control panel i See page 19
„ Using the Web Based Management (web browser)
i
See page 20
„ Using the Remote Setup i See page 20
„ Using other methods
i
See page 20