11 set your station id, Set your station id – Brother MFC-J430W User Manual
Page 10
10
11
Set your Station ID
You should store your name and fax number to be
printed on all fax pages that you send.
For details, see Entering Text in Appendix C of the
Basic User’s Guide.
a
Press Menu.
b
Press a or b to choose Initial Setup.
Press OK.
c
Press a or b to choose Station ID.
Press OK.
d
Enter your fax number (up to 20 digits) on the
dial pad, and then press OK.
e
Enter your name (up to 20 characters) using
the dial pad, and then press OK.
f
Press Stop/Exit.
Note
• See the following chart for entering your name.
• If you need to enter a character that is on the
same key as the character before, press c to
move the cursor to the right.
• If you entered a character incorrectly and want
to change it, press d or c to move the cursor to
the incorrect character, and then press Clear.
Press
key
One
time
Two
times
Three
times
Four
times
Five
times
2
A
B
C
2
A
3
D
E
F
3
D
4
G
H
I
4
G
5
J
K
L
5
J
6
M
N
O
6
M
7
P
Q
R
S
7
8
T
U
V
8
T
9
W
X
Y
Z
9
Note
If you make a mistake and want to start again,
press Stop/Exit and go back to
Note
(USA only)
The Telephone Consumer Protection Act of 1991
makes it unlawful for any person to use a
computer or electronic device to send any
message via a telephone fax machine unless
such messages clearly contain, in a margin at the
top or bottom of each transmitted page, or on the
first page of the transmission, the date and time it
is sent and an identification of the business or
other entity or other individual sending the
message and the telephone number of the
sending machines or such business, other entity
or individual.