Brother MFC-9130CW - Manual (Page 20)

Troubleshooting
17
3
Error messages when configuring Wi-Fi Direct from the control panel menu
Error Message Cause Action
(For HL-3140CW,
HL-3150CDW and
HL-3170CDW)
Connection Fail
(For DCP-9020CDW,
MFC-9130CW,
MFC-9330CDW and
MFC-9340CDW)
Connection Failed
The Brother machine and your mobile
device cannot communicate during the
configuration.  Move the mobile device closer to your
Brother machine.
 Move your Brother machine and the
mobile device to an obstruction-free
area.
 If you are using the PIN Method of WPS,
make sure you have input the correct
PIN code.
(For HL-3140CW,
HL-3150CDW and
HL-3170CDW)
Connection Error
(For DCP-9020CDW,
MFC-9130CW,
MFC-9330CDW and
MFC-9340CDW)
Connection Error
Other devices are trying to connect to the
Wi-Fi Direct network at the same time. Make sure there are no other devices trying
to connect to the Wi-Fi Direct network and
then try to configure the Wi-Fi Direct
settings again.
(For HL-3140CW,
HL-3150CDW and
HL-3170CDW)
No Device
(For DCP-9020CDW,
MFC-9130CW,
MFC-9330CDW and
MFC-9340CDW)
No Device
The Brother machine cannot find your
mobile device.  Make sure your machine and mobile
device are in the Wi-Fi Direct mode.
 Move the mobile device closer to your
Brother machine.
 Move your Brother machine and the
mobile device to an obstruction-free
area.
 If you are manually configuring the Wi-Fi
Direct network, make sure you have
entered the correct password.
 If your mobile device has a configuration
page for how to obtain an IP address,
make sure the IP address of your mobile
device has been configured via DHCP.