Brother MFC-J285DW - Manual (Page 11)

7
3
3
Additional sending
options
3
Sending faxes using multiple
settings
3
When you send a fax, you can choose a
combination of settings, such as
Fax Resolution, Contrast,
Glass Scan Size, and Real Time TX.
You can also choose: History,
Address Book, Broadcasting,
Color Setting, Overseas Mode,
Set New Default, and Factory Reset.
Some settings are only available when
sending black & white faxes.
a
Load your document.
b
Press (Fax).
The Touchscreen shows:
c
Press Options.
d
Press s or t on the Touchpanel to
display the setting you want to change.
When the setting is displayed, press it.
e
Press the option you want to set.
f
Repeat steps d and e to change
additional settings.
g
Press OK when you are finished
changing settings.
h
Enter the fax number.
i
Press Fax Start.
NOTE
• Most settings are temporary and the
machine returns to its default settings after
you send a fax.
• You can save some of the settings you
use most often by making them the default
settings. These settings will stay until you
change them again. (See Setting your
changes as the new default on page 9.)
Stop faxing
3
To stop faxing, press .
Contrast
3
If your document is very light or very dark, you
may want to change the contrast. For most
documents, the factory setting Auto can be
used. Auto chooses the suitable contrast for
your document.
Choose Light when sending a light
document. Choose Dark when sending a
dark document.
a
Load your document.
b
Press (Fax).
c
Press Options.
d
Press s or t on the Touchpanel to
display Contrast.
e
Press Contrast.
f
Press s or t to display Auto, Light or
Dark, and then press the option you
want to set.
g
Press OK.
Sending a fax
3