Brother HL-4040CDN - Manual (Page 53)

Wireless configuration for Windows
®
using the Brother automatic installer application
46
4
h
For configuration, it is recommended that you temporarily connect your Brother wireless device (your
printer) directly to a free port on your access point, hub or router using a network cable.
If you can temporarily connect with a network cable:
Choose I’m able to temporarily connect my device to my access point with a network cable and
then click Next. Go to i.
If you do not have a network cable or cannot temporarily connect the Brother wireless device to your
access point:
Choose I’m not able to connect my device to my access point with a network cable and then
click Next. Go to j.
i
Connect the Brother wireless device to your access point using a network cable and click Next. Go to n.