Brother HL-4040CDN - Manual (Page 117)

Control panel setup
110
10
(HL-4070CDW)
10
See (HL-4040CN / HL-4040CDN / HL-4050CDN) on page 109 for the HL-4040CN / HL-4040CDN
/HL-4050CDN LAN menu table.
Level one Level two Level three Level four Options
LAN Wired TCP/IP BOOT Method
Auto*, Static, RARP, BOOTP, DHCP
IP Address [000-255].[000-255].[000-255].[000-
255]
[000].[000].[000].[000] * 1
Subnet Mask [000-255].[000-255].[000-255].[000-
255]
[000].[000].[000].[000] * 1
Gateway [000-255].[000-255].[000-255].[000-
255]
[000].[000].[000].[000] *
IP Boot Tries 0 to 32767
3*
APIPA
On*, Off
IPv6 On,
Off*
Ethernet
Auto*, 100B-FD, 100B-HD, 10B-FD, 10B-HD
Set to
Default
OK? -
Wired Enable
On*, Off
-
WLAN TCP/IP BOOT Method
Auto*, Static, RARP, BOOTP, DHCP
IP Address [000-255].[000-255].[000-255].[000-
255]
[000].[000].[000].[000] * 1
Subnet Mask [000-255].[000-255].[000-255].[000-
255]
[000].[000].[000].[000] * 1
Gateway [000-255].[000-255].[000-255].[000-
255]
[000].[000].[000].[000] *
IP Boot Tries 0 to 32767
3*
APIPA
On*, Off
IPv6 On,
Off*
Setup WLAN Setup Wizard See Using the Setup Wizard from the control
panel on page 28.
SecureEasySetup Configuration using
SecureEasySetup™. on page 19.