Brother MFC-J4510DW - Manual (Page 12)

Introduction
9
1
How to register and delete accounts on the machine
1
Enter the account information and configure the machine so that it can access the service:
Register an account
1
For MFC-J2510/J4510DW/J4710DW
1
a Before you register an account, confirm that the correct time and date are set on the machine’s control
panel. See the Quick Setup Guide included with your machine for instructions on setting the correct time
and date.
b
Swipe left or right, or press d or c to display the More screen.
c Press Web.
Information regarding the Internet connection is displayed on the machine’s LCD. Read the information
and press OK.
d
You will be asked if you want to display this information again in the future.
Press Yes or No.
NOTE
If there are announcements about new features, and so on, the latest information will be displayed. Read
the information and press OK.
e
Choose the desired service.
f
If information regarding Brother Web Connect is displayed, press OK.
g
Press Register/Delete Account.
h Press Register Account.
i A message is displayed prompting you to enter the temporary ID you received when you applied for
Brother Web Connect access.
Press OK.
j
Enter the temporary ID.
Press OK.
NOTE
An error message will appear on the LCD if the information you entered does not match the temporary ID
you received when you applied for access or if the temporary ID has expired. Either enter the temporary
ID correctly or apply for access again and receive a new temporary ID (see How to apply for Brother Web
Connect access on page 7).
k A message is displayed, prompting you to enter a name for the account as you want it to be displayed
on the LCD.
Press OK.