Brother MFC-495CW - Manual (Page 94)

78
11
How to copy
11
Entering Copy mode
11
When you want to make a copy, press
(Copy) to illuminate it in blue.
The LCD shows:
1 No. of Copies
You can enter the number of copies you want
by using the dial pad.
Press a or b to scroll through the Copy key
options.
„ Quality (See page 79.)
„ Enlarge/Reduce (See page 79.)
„ Paper Type (See page 83.)
„ Paper Size (See page 84.)
„ Brightness (See page 82.)
„ Contrast (See page 82.)
„ Ink Save Mode (See page 83.)
„ Stack/Sort (See page 82.)
„ Page Layout (See page 80.)
„ Book Copy (See page 84.)
„ Watermark Copy (See page 85.)
„ Set New Default (See page 86.)
„ Factory Reset (See page 86.)
When the option you want is highlighted,
press OK.
Note
• The default made is Fax. You can change
the amount of time that the machine stays
in Copy mode after the last copy
operation. (See Mode Timer on page 24.)
• Book Copy, Watermark Copy and
Ink Save Mode features are supported
by technology from Reallusion, Inc.
Making a single copy
11
a
Press (Copy).
b
Load your document.
(See Loading documents on page 21.)
c
Press Black Start or Color Start.
Making multiple copies
11
You can make up to 99 copies in one print run.
a
Press (Copy).
b
Load your document.
(See Loading documents on page 21.)
c
Enter the number of copies you want.
d
Press Black Start or Color Start.
Note
To sort the copies, press a or b to choose
Stack/Sort. (See Sorting copies using
the ADF on page 82.)
Stop copying
11
To stop copying, press Stop/Exit.
Making copies
11
01 1
COPY Copy Press Start
Normal
100% 100% Enlarge/Reduce Enlarge/Reduce
Plain Paper Plain Paper Paper Paper Type ype
Ratio: Ratio:
Quality