Brother MFC 7860DW - Manual (Page 33)

Loading paper
17
2
Paper settings
2
Paper Type
2
Set up the machine for the type of paper you
are using. This will give you the best print
quality.
a
Press Menu, 1, 2, 1.
Paper
1.Paper Type
b
Press a or b to choose Thin, Plain,
Thick, Thicker, Recycled Paper or
Label.
Press OK.
c
Press Stop/Exit.
Paper Size
2
You can use several different sizes of paper
for printing copies: Letter, Legal, Executive,
A4, A5, A5L, A6, B5, B6, and Folio (8.5 in. x
13 in.).
When you change the size of paper in the
tray, you will also need to change the setting
for paper size at the same time so your
machine can fit the document or an incoming
fax on the page.
a
Press Menu, 1, 2, 2.
Paper
2.Paper Size
b
Press a or b to choose A4, Letter,
Legal, Executive, A5, A5 L, A6, B5,
B6, or Folio.
Press OK.
c
Press Stop/Exit.
Acceptable paper and
other print media
2
Print quality may vary according to the type of
paper you are using.
You can use the following types of print
media: thin paper, plain paper, thick paper,
bond paper, recycled paper, labels or
envelopes.
For best results, follow the instructions below:
 DO NOT put different types of paper in the
paper tray at the same time because it
may cause paper jams or misfeeds.
 For proper printing, you must choose the
same paper size from your software
application as the paper in the tray.
 Avoid touching the printed surface of the
paper immediately after printing.
 Before you buy a lot of paper, test a small
quantity to make sure the paper is
suitable.
Recommended paper and
print media
2
Paper Type Item
Plain Paper Xerox 4200DP 20 lb
Hammermill Laser Print
(24 lb=90 g/m
2
)
Recycled Paper No specific brand
recommended
Labels Avery laser labels white
#5160
Envelope No specific brand
recommended