Brother MFC 7860DW - Manual (Page 122)

106
Machine Information
B
Checking the Serial Number
B
You can see the machine’s Serial Number on
the LCD.
a
For MFC-7360N, MFC-7365DN and
MFC-7460DN, press Menu, 6, 1.
For MFC-7860DW, press Menu, 7, 1.
Machine Info.
1.Serial No.
b
The machine will display the machine’s
Serial Number on the LCD.
c
Press Stop/Exit.
Reset functions
B
The following reset functions are available:
1 Network
You can reset the internal print server
back to its default factory settings such as
the password and IP address information.
2 Address & Fax
Address & Fax resets the following
settings:
 Address Book
(One Touch Dial/Speed Dial/Setup
Groups)
 Programmed fax jobs in the memory
(Polled TX, Delayed Fax)
 Station ID
(name and number)
 Coverpage Msg
(comments)
 Remote Fax Options
(Remote Access Code, Fax Storage,
Fax Forwarding, Paging and PC-Fax)
 Report settings
(Transmission Verification Report/
Tel Index List/Fax Journal)
 Setting Lock password
3 All Settings
You can reset all the machine settings
back to the settings that were set at the
factory.
Brother strongly recommends you
perform this operation when you dispose
of the machine.
Note
Unplug the interface cable before you
choose Network or All Settings.