2 load paper in the paper tray, Load paper in the paper tray, Setting up the machine – Brother MFC-8870DW User Manual
Page 7: 2load paper in the paper tray
Setting Up the Machine
5
2
Load paper in the paper tray
1
Pull the paper tray completely out of the
machine.
2
While pressing the blue paper guide release
lever (1), slide the adjusters to fit the paper
size. Check that the guides are firmly in the
slots.
Note
For Legal size paper, press the lever (1) located at
the back of the tray and pull out the back of the
paper tray. Move the tray lock button (2) to the lock
position.
3
Fan the stack of paper well to avoid paper jams
and misfeeds.
4
Put paper in the paper tray.
Check that the paper is flat in the tray and
below the maximum paper mark (1).
5
Put the paper tray firmly back into the machine
and unfold the output tray support flap (1)
before you use the machine.
Note
For details on supported paper specifications, see
“Acceptable paper and other media” in Chapter 2
of the User’s Guide.
(1)
(1)
(2)
(1)
(1)