Brother MFC-J4710DW - Manual (Page 59)

Web Based Management
53
5
NOTE
• You must configure Date&Time to synchronize the time used by the machine with the SNTP time server.
Click Date&Time>> and then configure Date and Time on the General screen. You can also configure the
Date and Time from the machine’s control panel.
• Choose the Synchronize with SNTP server check box. You also need to verify your time zone settings
correctly. Choose the time difference between your location and UTC from the Time Zone pull-down list.
For example, the time zone for Eastern Time in the USA and Canada is UTC-05:00.
 Synchronization Status
You can confirm the latest synchronization status.
d Click Submit to apply the settings.