Brother MFC-J4710DW - Manual (Page 44)

Control panel setup
38
4
Restoring the network settings to factory default
4
You can reset the print server back to its default factory settings (resetting all information such as the
password and IP address information).
NOTE
• This function restores all wired and wireless network settings to the factory default.
• You can also reset the print server back to its factory default settings using the BRAdmin applications or
Web Based Management. (For more information, see Other Management Utilities on page 8.)
(For MFC-J2510/J4510DW/J4710DW)
4
a
Press .
b Press All Settings.
c Press Network.
d Press Network Reset.
e
Reset Network? will be displayed. Press Yes.
f
Reboot OK? will be displayed. Press Yes for 2 seconds to confirm.
g
The machine will re-start.
(For DCP-J4110DW, MFC-J2310/J4310DW/J4410DW/J4610DW)
4
a Press Settings.
b Press s or t to display Network and then press Network.
c Press s or t to display Network Reset and then press Network Reset.
d
Press Yes.
e
Press Yes for 2 seconds to confirm.