Brother MW-145BT - Manual (Page 22)

Getting Started
9
„ Charging LED (Orange)
With the charging LED, the status of the power
supply can be checked.
The charging LED has two functions.
(1) Checking the charging status (when the AC adapter is
connected)
(2) Checking the battery level (while running off the lithium ion
battery)
LED status Printer status
Constantly lit Charging
Off Finished charging
Flashing Malfunctioning battery
LED status Battery level
Off More than 60% charged
Flashes once Less than 60% charged
Flashes twice Less than 30% charged
Continues to flash 3 times Almost empty
• Please try to discharge the battery completely before
recharging it, to increase battery lifetime.
• If the charging LED flashes while the printer is printing,
immediately connect the AC adapter and charge the
battery. The printer may stop printing.
• Due to the characteristics of batteries, even though the
battery is fully charged, using them in locations at low
temperatures greatly reduces the number of prints
possible.
• In order to maintain the efficiency and life of the
rechargeable battery, remove the AC adapter from the
printer when charging is completed.
• In order to maintain the efficiency and life of the
rechargeable battery, do not place or use the printer in
direct sunlight, near heaters or other hot appliances, in
any location exposed to extremely high temperatures
(e.g. on the dashboard or in the back of your car).