Brother MFC-665CW - Manual (Page 123)

PhotoCapture Center
®
107
14
c
If you do not want to change additional
settings, press Color Start to print.
Color Enhancement (True2Life
®
)
14
The color enhancement (True2Life
®
) feature
will produce more vivid images. Your
photographs will take slightly longer to print.
a
Press a or b to choose True2Life.
Press OK.
b
Do one of the following:
„ If you want to customize the White
Balance, Sharpness or Color
Density, press d or c to choose On
and then go to step c.
„ If you do not want to customize,
press d or c to choose Off.
Press OK and then go to step f.
c
Press a or b to choose
White Balance
, Sharpness or
Color Density
.
Press OK.
d
Press d or c to adjust the degree of the
setting.
Press OK.
e
Do one of the following:
„ If you want to customize other color
enhancement, press a or b to
choose other option.
„ If you want to change other settings,
press a or b to choose Exit, and
then press OK.
f
If you do not want to change additional
settings, press Color Start to print.
Note
• White Balance
This setting adjusts the hue of the white
areas of an image. Lighting, camera
settings and other factors will effect the
appearance of white. By using this
adjustment, you can correct this effect and
bring the white areas back to pure white.
• Sharpness
This setting enhances the detail of an
image. It is similar to adjusting the fine
focus on a camera. If the image is not in
focus and you cannot see the fine details
of the picture, then adjust the sharpness.
• Color Density
This setting adjusts the total amount of
color in the image. You can increase or
decrease the amount of color in an image
to improve a washed out picture.