Brother MFC-665CW - Manual (Page 86)

Chapter 8
70
Deleting a number from a Group
8
a
Press Menu.
b
Press a or b to choose Fax.
Press OK.
c
Press a or b to choose
Set Quick-Dial
.
Press OK.
d
Press a or b to choose
Setup Groups
.
Press OK.
e
Press a or b to choose the Group you
want to change.
Press OK.
f
Press a or b to choose the number you
want to delete.
Press OK.
Then, confirm the Delete by pressing 1.
g
Press a or b to choose Complete.
Press OK.
h
Press Stop/Exit.
Dialing Access codes and
credit card numbers
8
Sometimes you may want to choose from
several long distance carriers when you
make a call. Rates may vary depending on
the time and destination. To take advantage
of low rates, you can store the access codes
of long-distance carriers and credit card
numbers as Speed-Dial numbers. You can
store these long dialing sequences by
dividing them and setting them up as
separate Speed-Dial numbers in any
combination. You can even include manual
dialing using the dial pad. (See Storing
Speed-Dial numbers on page 66.)
For example, you have stored ‘555’ on
Speed-Dial: 03 and ‘7000’ on Speed-Dial: 02.
a
Press Search/Speed Dial.
b
Enter 03.
Note
If you stored 2 numbers in one Speed-Dial
location, you will be asked which number
you want to send to.
c
Press a or b to choose Speed-Dial.
Press OK.
d
Enter 02.
e
Press Black Start or Color Start.
You will dial ‘555-7000’.
To temporarily change a number, you can
substitute part of the number with manual
dialing using the dial pad. For example, to
change the number to 555-7001 you could
press Search/Speed Dial, 03 and then press
7001 using the dial pad.
Note
If you must wait for another dial tone or
signal at any point in the dialing sequence,
create a pause in the number by pressing
Redial/Pause. Each key press adds a
3.5-second delay.