Brother DCP-7040 - Manual (Page 39)

Making copies
27
4
Using the Options key
4
Use the Options key to quickly set the following copy settings temporarily for the next copy.
Improving copy quality
4
You can choose from a range of quality
settings. The default setting is Auto.
„ Auto
Auto is the recommended mode for
ordinary printouts. Suitable for documents
that contain both text and photographs.
„ Text
Suitable for documents containing only
text.
„ Photo
Suitable for copying photographs.
To temporarily change the quality setting,
follow the steps below:
a
Load your document.
b
Enter the number of copies you want.
c
Press Options.
Press a or b to choose Quality.
Press OK.
d
Press a or b to choose Auto, Photo or
Text.
Press OK.
e
Press Start.
Press Menu selections Options Page
Press a or b, then press OK Press a or b, then press OK
Quality Auto*
Photo
Text
27
(DCP-7040 only)
Stack/Sort
(appears when the document
is in the ADF)
Stack*
Sort
28
Page Layout Off(1 in 1)*
2 in 1 (P)
2 in 1 (L)
4 in 1 (P)
4 in 1 (L)
28
The factory settings are shown in Bold with an asterisk.