Brother PocketJet PJ-673 w WLAN - Manual (Page 21)

Setting Up the Printer
17
1
d
Click [Send Settings].
e
When the USB cable is disconnected,
the next screen automatically appears.
f
Click [Close].
The installation is now complete.
Continue by setting up the computer
running Windows
®
and adding the
printer.
Setting Up the Computer Running
Windows
®
1
This procedure describes how to specify
settings for a wireless LAN connection. Since
the connection procedure differs depending
on the operating system, check the
procedure for your operating system. (As
examples, screens from Windows
®
7 are
used in the following procedures.)
Performing the procedure to Adding a Printer
will complete printing setup.
If wireless LAN is disabled on the computer
running Windows
®
, enable it.
Switch the printer to wireless LAN mode. To
enter wireless LAN mode, check that the
POWER indicator is lit, and then hold down
(at least 3 seconds) the (Power) button.
Check that the WIRELESS LAN indicator is
blinking. For details, see Switching Between
Wireless LAN Mode and USB Mode
on page 30.
a
Windows
®
8:
Click [Control Panel] in [Apps] screen -
[Network and Internet].
Click [Network and Sharing Center].
Windows
®
7:
From the [Start] menu, click [Control
Panel]-[Network and Internet].
Click [Network and Sharing Center].
Windows Vista
®
:
From the [Start] menu, click [Connect
to].
Windows
®
XP:
From the [Start] menu, click [Control
Panel]-[Network connection].
Right-click [Wireless Network
Connection], and then click [View
Available Wireless Networks].
A