Brother MFC-885CW - Manual (Page 45)

Installing the Driver & Software
43
Macintosh
®
M
a
c
int
os
h
®
Wi
rel
e
ss
Netw
o
rk
6
For Wireless Network Interface Users
(For Mac OS
®
X 10.2.4 or greater) in infrastructure mode
Connecting your wireless machine and wireless network together and
installing the printer driver in infrastructure mode
First you must configure the wireless network settings of your machine to communicate with your network access
point (router). After the machine is configured to communicate with your access point (router) computers on your
network will have access to the machine. To use the machine from these computers, you will need to install the
MFL-Pro Suite. The following steps will guide you through the configuration and installation process.
To achieve optimum results with normal every day document printing, place the Brother machine as close to the
network access point (router) as possible with minimal obstructions. Large objects and walls between the two
devices as well as interference from other electronic devices can affect the data transfer speed of your documents.
Due to these factors, wireless may not be the best method of connection for all types of documents and
applications. If you are printing large files, such as photos or multi-page documents with mixed text and large
graphics, you may want to consider choosing wired Ethernet for a faster data transfer, or USB for the fastest
throughput speed.
Important
The following instructions will offer two methods for installing your Brother machine in a wireless
network environment. Both methods are for infrastructure mode, using a wireless router or access
point that uses DHCP to assign IP addresses. If your wireless router/access point supports
SecureEasySetup™ or AOSS™ follow the steps on page 45 Using the SecureEasySetup™ or AOSS™
software to configure your machine for a wireless network. If your wireless router/access point does
not support SecureEasySetup™ or AOSS™ follow the steps on page 47 Using the Setup Wizard from
the control panel LAN menu for wireless network configuration. To set up your machine in any other
wireless environment you can find instructions in the Network User’s Guide on the CD-ROM.
You can view the Network User’s Guide by following the instructions below.
1 Turn on your Macintosh
® . Insert the Brother CD-ROM into your CD-ROM drive.
2 Double-click Documentation.
3 Double-click your language folder.
4 Double-click the top page file in HTML format.
5 Click NETWORK USER’S GUIDE.