Brother MFC-J625DW - Manual (Page 14)

8
3
Additional sending
options
3
Sending faxes using multiple
settings
3
When you send a fax you can choose a
combination of settings, such as
Fax Resolution, Contrast,
Glass ScanSize, and Real Time TX.
You can also choose: History,
Speed Dial, Broadcasting,
Delayed Fax
1 , Batch TX 1 ,
Polled TX
1
, Polling RX
1
,
Overseas Mode, Set New Default, and
Factory Reset.
Some settings are only available when
sending black & white faxes.
1 MFC-J625DW only.
a
Press (FAX).
The screen shows:
b
Press Options.
c
Press s or t to display the setting you
want to change. When the setting is
displayed, press it.
d
Press s or t to display the available
options, and then press the option you
want.
e
Repeat steps c to d to change more
settings.
Note
• Most settings are temporary and the
machine returns to its default settings after
you send a fax.
• You can save some of the settings you
use most often by setting them as the
default. These settings will stay until you
change them again. (See Setting your
changes as the new default uu page 9.)
Stop faxing
3
To stop faxing, press Stop/Exit.
Contrast
3
If your document is very light or very dark, you
may want to change the contrast. For most
documents the factory setting Auto can be
used. It automatically chooses the suitable
contrast for your document.
Choose Light when sending a light
document. Choose Dark when sending a
dark document.
a
Press (FAX).
b
Press Options.
c
Press s or t to display Contrast.
d
Press Contrast.
e
Press s or t to display Auto, Light or
Dark, and then press the option you
want.
Note
Even if you choose Light or Dark, the
machine will send the fax using the Auto
setting in any of the following conditions:
• When you send a color fax.
• When you choose Photo as the Fax
Resolution.
Sending a fax
3