Brother MFC-J625DW - Manual (Page 17)

Sending a fax
11
3
Sending a fax at the end of a
conversation
3
At the end of a conversation, you can send a
fax to the other party before you both hang
up.
a
Ask the other party to wait for fax tones
(beeps) and then to press the Start or
Send key before hanging up.
b
Press (FAX).
c
Load your document.
d
Press Black Start or Color Start.
 If you are using the scanner glass,
press Send to send the fax.
e
Replace the handset of the external
phone.
Dual Access
(Black & White only)
3
You can dial a number and start scanning the
fax into memory—even when the machine is
sending from memory, receiving faxes or
printing PC data. The screen shows the new
job number.
The number of pages you can scan into the
memory will vary depending on the data that
is printed on them.
Note
If the Out of Memory message appears
while scanning a document, press
Stop/Exit to cancel or Black Start to send
the scanned pages.
Broadcasting
(Black & White only)
3
Broadcasting is when the same fax message
is automatically sent to more than one fax
number. You can include Groups and
Speed Dial numbers in the same broadcast.
After the broadcast is finished, a Broadcast
Report will be printed.
Before you begin the broadcast
3
Speed Dial numbers must be stored in the
machine's memory before they can be used
in a broadcast. (uuBasic User’s Guide:
Storing Speed Dial numbers)
Group numbers must also be stored in the
machine's memory before they can be used
in a broadcast. Group numbers include many
stored Speed Dial numbers for easier dialing.
(See Setting up Groups for Broadcasting
uu
page 34.)
How to broadcast a fax
3
a
Press (FAX).
b
Load your document.
c
Press Options.
d
Press s or t to display
Broadcasting.
e
Press Broadcasting.
f
Press
Add number from SpeedDial.
Press
to search by
Alphabetical Order or Numerical Order.
Press the check boxes of the numbers
you want to add to the broadcast.
After you have checked all the numbers
you want, press OK.
g
Press OK.