Brother MFC-J625DW - Manual (Page 58)

Chapter 8
52
Borderless printing
8
This feature expands the printable area to the
edges of the paper. Printing time will be
slightly slower.
a
Press (PHOTO).
Do one of the following:
 Press View Photos and press
s
or t to display each photo. When
the photo you want is displayed,
press OK.
 Press Print All.
b
Press Options.
c
Press s or t to display Borderless.
d
Press Borderless.
e
Press Off (or On).
f
If you do not want to change additional
settings, press .
Press Start to print.
Print Date
8
You can print the date if it is already in the
data on your photo. The date will be printed
on the lower right corner. If the data doesn’t
have the date information, you cannot use
this function.
a
Press (PHOTO).
Do one of the following:
 Press View Photos and press
s
or t to display each photo. When
the photo you want is displayed,
press OK.
 Press Print All.
b
Press Options.
c
Press s or t to display Print Date.
d
Press Print Date.
e
Press On (or Off).
f
If you do not want to change additional
settings, press .
Press Start to print.
Note
The DPOF setting on your camera must
be turned off to use the Print Date
feature.
Setting your changes as the
new default
8
You can save the print settings you use most
often by setting them as the default settings,
such as Print Quality, Paper Type,
Paper Size, Brightness, Contrast,
True2Life, Cropping, Borderless and
Print Date. These settings will stay until
you change them again.
a
Press your new setting.
Repeat this step for each setting you
want to change.
b
After changing the last setting, press
s
or t to choose Set New Default.
c
Press Set New Default.
d
Press OK.
The screen asks you again to confirm if
you set the change as the new default.
Press Yes.
e
Press Stop/Exit.