Brother MFC-J625DW - Manual (Page 59)

PhotoCapture Center™: Printing photos from a memory card or USB Flash memory drive (MFC-J625DW only)
53
8
Restoring all settings to the
factory settings
8
You can restore the PhotoCapture settings
that you have changed, to the factory
settings, such as Print Quality,
Paper Type, Paper Size, Brightness,
Contrast, True2Life, Cropping,
Borderless and Print Date.
a
Press (PHOTO).
Do one of the following:
 Press View Photos and press
s
or t to display each photo. When
the photo you want is displayed,
press OK.
 Press Print All.
b
Press Options.
c
Press s or t to display
Factory Reset.
d
Press Factory Reset.
e
Press Yes to confirm.
f
Press Stop/Exit.
Scan to a memory card
or USB Flash memory
drive
8
How to set a new default
8
You can save the Scan to Media settings
(Quality and File Type) you use most
often by setting them as the default settings.
These settings will stay until you change
them again.
a
Press (SCAN).
b
Press s or t to display
Scan to Media.
c
Press Scan to Media.
d
Press Options.
e
Press Quality or File Type. Then
press the option you want.
Repeat this step for each setting you
want to change.
f
After you are finished choosing your
preferred settings, press
Set New Default.
g
Press OK.
The screen asks you again to confirm
the change as the new default.
Press Yes.
h
Press Stop/Exit.