Brother DCP-J140W - Manual (Page 116)

Scanning
109
6
Scanning a whole page
6
a Load your document.
b
Adjust the following settings, if needed, in the scanner setup dialog box:
 Resolution
 Scan Type
 Scanning Area
 Document Size
 Adjust Image
• Brightness
• Contrast
c Click Start.
When scanning has finished, the image appears in your graphics application.
Pre-Scanning an image
6
The PreScan button is used to preview and also lets you crop any unwanted areas from the image. When
you are satisfied with the preview, click the Start button in the Scanner Setup dialog box to scan the image.
a Load your document.
b
Click PreScan.
The whole image is scanned into your computer and appears in the Scanning Area.
c
Drag the mouse cursor over the portion you want to scan (1).
d Adjust the settings for Resolution, Scan Type, Brightness and Contrast in the Scanner Setup dialog
box as needed.
1