Brother MFC-9330CDW - Manual (Page 76)

Chapter 10
62
Printing data directly
from the USB Flash
memory drive or digital
camera supporting
mass storage
10
NOTE
• Make sure your digital camera is turned
on.
• Your digital camera must be switched
from PictBridge mode to mass storage
mode.
a
Connect your USB Flash memory drive
or digital camera to the USB direct
interface (1) on the front of the machine.
The Touchscreen will automatically
show the USB memory menu to confirm
the intended use of the USB Flash
memory drive or digital camera.
NOTE
• If an error occurs, the USB memory menu
will not appear on the Touchscreen.
• When the machine is in Deep Sleep
mode, the Touchscreen does not show
any information even if you connect a USB
flash memory drive to the USB direct
interface. Press the Touchscreen to wake
up the machine.
b
Press Direct Print .
NOTE
If your machine has been set to Secure
Function Lock
On , you may not be able to
access Direct Print (see Advanced User's
Guide: Switching Users).
1
1